ST-773 Luminescent Dissolved Oxygen Sensor

Rp24.512.250

Add to Wishlist
Add to Wishlist

Inexpensive CPVC Dissolved Oxygen Sensor.

An Optical Luminescent Dissolved Oxygen (DO) Sensor, made of CPVC, that measures at a range of 0.004–20mg/L (ppb) and is meant for inline or submersion installations.

CE Mark  

Deskripsi

The Pyxis Lab® ST-773 optical luminescent dissolved oxygen sensor is based on the principle of ‘fluorescence quenching’ to determine the dissolved oxygen content in water. It incorporates our advanced technology in the field of fluorescence detection. Uses dual Blue/Red light detection technology with excitation and reference light sources, offering a wide detection range and very low detection limit.

The sensor also integrates a temperature sensor for compensation of the measurement of dissolved oxygen based on environmental conditions. The ST-773 offers an easily replaceable, front loading DO membrane cap that has been independently developed by Pyxis Lab®, with a typical service life of up to 2 years. So, this unique membrane cap design incorporates a black microporous PTFE membrane material designed to provide extreme scratch resistance, extended life span and simple replacement.

Furthermore, the flat front-end design of the ST-773 may be utilized in a submersed fixed/floating application or inline with the Pyxis submersion assembly and inline thread/tee accessory options. The ST-773 comes with a 10m bulkhead cable, as well as a 1.5m flying lead cable each with 7-Pin quick adapters. The sensor output offers both 4-20mA and RS-485 Modbus communication which is Bluetooth® enabled when used with the MA-WB adapter.

Features

  • 0.004–20mg/L Measurement Range – Stable Measurement with Ultra-Low Drift
  • Simple PTFE Film DO Cartridge Replacement
  • Built-In Temperature Sensor with Automatic Compensation
  • Built-In Transmitter without Preamplifier or Meter Head
  • Dual Outputs both 4-20mA Isolated Signal & RS-485 Modbus
  • CPVC Body – Lightweight & Corrosion Resistant
  • Wireless Calibration, Diagnostics, Data Trend via uPyxis® with the MA-WB
  • Submersible or Inline Installations available using our Submersion or Inline Adapters
  • Meter Tail = 3/4inch NPT Outer Diameter Threading for Simple Installation

Typical Applications

  • Activated Sludge /Aeration Tanks / Nutrient Removal / Wastewater
  • Chemical / Process Water / Domestic & Drinking Water
  • Filtration / Aquaculture / Agriculture

Specifications

ItemST-773
Part Number53709
Body MaterialCPVC
InstallationSubmerged/Inline Installation
DO Measuring Range0.004mg/L or 0-200% Saturation
Accuracy±0.3mg/L or ±3%, Whichever is greater
Light SourceBlue Light Irradiated Emission / Red Light Quenching Excitation
Response Time<60 seconds
Operational Temperature0-45 °C (32-113 °F)
Operational Voltage22-26V DC, Power 0.6W
Signal Output4-20mA Analog Output / RS-485 Digital Output
Dimension (L x D)206×24.6mm (8.11×0.97in)
Threading (Meter Tail)3/4inch NPT
Weight188g (0.42lb) Cable Excluded
Working Pressure75psi
Wet MaterialCPVC/Polycarbonate
Cables Provided(1) 4.9ft/1.5m Flying Lead
(1) 30ft/15m Bulkhead Cable
CalibrationSlope Calibration: Air or Air Saturated Water
Zero Calibration: 5% Sodium Sulfite or Nitrogen Gas
DO Membrane Cap Life1.5 Years
Protection GradeIP-67
RegulationCE / RoHS
ComplianceUSEPA 40CFR Part 136.3
ISO 17289:2014

Video

Document

ST-773 Dissolved Oxygen Sensor Data Sheet

ST-773 User Manual V0.90

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “ST-773 Luminescent Dissolved Oxygen Sensor”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Send us a message

Have other questions?